Question about Dehumidifiers
threads for the drain on the bucket of my dehumidifier is stripped. Sears part #327660601. The part is no longer manufactured. What do I do now?? It's leaking. Kenmore Model # 5045 Thanks for any help
...threads. still leaks slightly, not filling the bucket as quickly. gonna try some pipe tape on the threads today. I was under the impression that the drain hose connected to the bucket with a screw on ...
...threads of the part facing the rear). If you dont have the connector drain hose, it's part number is 5214A20027B and you can easily order it online for less than $10. i had the same problem. i ...
how do you hook up drain hose to model HDN455 RB Remove the bucket and remove the plastic cap on the bottom of the bucket. Then take the rubber insert out of the cap and save it. You will use it later
...the bottom between the tank and the dehumidier itself The drain tube or hole that drains into the bucket is probably clogged. Turn the unit OFF and remove the bucket. Look in the cavity where the ...
threads on it and my pale inside is not filling up instead the dehumidifier is sitting on a five gallon bucket leaking into another pale what is my problem? I want the water to drain into the pale not
...threads-per-inch problem or not, but this solved the problem of water leaking into the bucket. Lay it on its back and take a good look where the hose is supposed to connect. The hose end is easy but ...
...leaking all over the floor. We have hard water and there is an accumulation of calcium on the bottom of the bucket. Could this be the problem? I'm not sure how hard tap water would affect a ...
...threads outside the machine. I had tried using hose clamps, but there wasn't the room available to replace the bucket with the clamps, so instead, the outside and the inside diameter of the were very ...
37 questions posted
Usually answered in minutes!
139 Questions
99 Questions
79 Questions
35 Questions
8 Questions