KitchenAid 24 in. KUDU02FR Built-in Dishwasher "problems flashing lights" Questions

Hi. Theres a flashing light on my adp4601. its the start light.i've taken off cover and checked for loose connections but it all seems to be fine. i've checked filters and pipe connections. could you ...

...flashing lights are most likely digital error codes flashing in a pattern. For instance, there could be the "clean" light flashing groups of 2 blinks and then 7 blinks or the "sensing" light flashing ...

...LIGHTS FLASHING KENMORE ELITE DISHWASHER LIGHTS FLASHING - SMART WASH, NORMAL WASH, TIMER LIGHT ON, CANCEL DRAIN. HAD A PROBLEM FEW WEEKS BACK WITH CLEAN LIGHT FLASHING RESET - SERVICE OUT - CLEANED ...

flashing lights I had a problem with my dishwasher, called and engineer, who said it was the PSB card which he has replaced - but now there are 2 out of 4 lights flashing and the engineer doesn't know

...lights flashing and blinking usually means some circuit or sensor problem > it will be helpful if you can provide the full dishwasher make and model number and specifically note which lights are ...

...lights flashing " wash " " drying " I had the problem of flashing lights and water did not pump out.Found a piece of bacon in drain pump wedged between impellor and pump body...cleaned it ...

on another blog that the manual recommends that you turn the power off to dishwasher. When you turn the washer back on, the lights still flash but then push the off button. The lights stopped flashing

...flashing lights at the unit's start, door lock, wash, rinse, final spin and control indicators to display error codes. If the five indica tor lights flash more than nine times, this signals a letter ...

Clean light blinks on whirlpool dishwasher won't run If you aren't sure whether Control Lock is on, press a cycle button on the keypad. If Control Lock is on, the light will blink three times. Turning

Washer stopped in mid wash. Clean light came on and flashes 7 times. Pressed clear went to 2 and finished. Pressed start light flashed 3 times won't start. Cleared program washer started and stopped ...