Question about Whirlpool Dishwashers
stuck on "clean" status and light is juts blibking on and off Hi , MY whirlpool dish washer is stuck on "clean" status and light is just blinking on and off. Washer is switched off but still the light
My whirlpool dishwasher status indicator light is stuck on clean. What can I do? You might have a faulty control board. Have it checked by an authorized service center.
...status stuck on clean. If I press cancel it goes into a 2 minute drain cycle, but there is no water in it. It will no reset or start....just blinks clean. if you have a heated dry option and normal ...
...stuck, and check that the orifices are free. When the top arm is not spinning you may need to replace pump and motor assembly. First it is good looking for blockage in pump hose. If the appliance is ...
...status of the water delivery hole. Lastly, check the spray tower, which consists of several rotating parts. Make sure no objects are stuck in the spray tower, then close up the dishwasher and try ...
...stuck, and test the switch using a multimeter to ensure it is closing and opening. Disconnect power before testing the switch. If water level is OK, then test the water valve. The inlet valve is ...
284 questions posted
Usually answered in minutes!
480 Questions
151 Questions
124 Questions
109 Questions
91 Questions