Question about KitchenAid Dishwashers
...power surge & verifying power supply restored used in office kitchen. experienced power surge in building that caused problems with other equipment. GFI checked, circuit breakers checked; ...
...power surge it will not fill with water it keeps humming like it is trying to fill but never does water line is clear no problem there any suggestions thanks Un plug the washer and let sit for 5 min. ...
Question about Dishwashers
...power surge yesterday my hotpoint dishwasher is doing this halfway through the cycle. It doesn't finish the cycle - water stays cold and it doesn't dry the dishes - any ideas's? The model is Try ...
Question about Dishwashers
...power surges. Try pressing the "Start/Reset" pad to reset the dishwasher and wait 2 minutes. If the problem persists, reset (reboot) the dishwasher by turning off power to the unit at the house ...
Question about Samsung Dishwashers
power surge on a samsung rt18m6213ww/aa This has happened before and repairman pushed buttons and fixed it in order to reset temps. I can figure out which ones he pushed and for how long! First things
...power to the unit or a surge on unit and resetting the breaker sometimes and cancelling out cyccle should correct if it continues then you are going to have a bad control board....good luck to ...
Question about Maytag Dishwashers
to buy the socket with the reset button and install it. You don't need it to run your washer, however it gives your washer added protection by tripping the internal breaker when there is a power surge
Question about Samsung Dishwashers
...power surges. ... If the problem persists, reset (reboot) thedishwasher by turning off power to the unit at the house circuit breaker/fuse box for 30 seconds. Restore power and the dishwasher should ...
...reset the dishwasher control board. If it still doesn't work then most likely the power failure burned up the main control board. The control boards in the newer dishwashers are sensitive to any type ...
Question about Dishwashers
and shut that down at the breaker or see if the unit is on a GFI outlet and see if that tripped. Then reset the breaker. A power outage can be from a surge and it may have burned out the control board
70 questions posted
Usually answered in minutes!
480 Questions
217 Questions
151 Questions
124 Questions
109 Questions