Question about Panasonic Office Equipment & Supplies
...RED than lamp runtime has reached 1800 hours. but projector still working. If LAMP INDICATOR light flashing RED than lamp circuit failure, or abnormal function or lamp unit is damaged. In this case ...
Question about Sanyo Office Equipment & Supplies
...red/ are lighting after ea 15 sec. a lamp never start and fans goes in OFF mode. I checked power supply lines S5V,S-5V,S16V on the Main Board . I checked unit lamp ballast -resistors,diodes and ...
...red light indicates lamp is expired. even though you get temporary light, the lamp is shot. Try BULBMAN.COM for a new lamp. lamp faliure not warming up fast enough sorry lamps exxxxxpensive red light ...
Question about InFocus Office Equipment & Supplies
...lamp indicators are flashing red and the power/stanby indicator is red Hello, In attempts to get your IN15 projector working, please try the steps below. Disconnect AC power from the projector and ...
...red lamp indicator light means that the lamp has expired, if its flashing red this means its nearing the end of its life, if the status indicator light is flashing then there could be another issue, ...
red, and the lamp indicator is flashing red over and over again, until I turn the power off. Thats the projector telling you that you need to replace the lamp. Lamps usually lasts for about 2000 hours
Question about Panasonic Office Equipment & Supplies
...lamp light flashes red three time and continues flashing red three times. I ordered a Panasonic ET-LAD35 lamp unit from www.misco.co.uk and even after replacing the lamp it has the same problem. I ...
...lamp light began to blink red, its a panasonic pt-lb10svu, show no pic at all has a new lamp Hi, Replacing the lamp in a Sharp LCD projector requires the lamp indicator to be reset. When the lamp ...
...lamp time limit. While the projector's red led is flashing, press the volume up and down buttons on the projector simultaneously and hold them both in for 10 seconds. This will reset the lamp inhibit ...
...after I switch on the projector after a few minutes lamp and power indicator get red and flash then picture vanishes Red lamps flash but picture doesn't disappear. 100hrs remaining on filter
39 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
454 Questions