...turns off and the power/standby light goes to red. At the same time the lamp shuts down without ever going to full power. red light indicates lamp is expired. even though you get temporary light, the ...
...status light which started out green begins to flash red. The lamp does not turn on. The lamp has run out of its operating hours which is normally 3000 hrs. Replace the lamp and you will be
...turns red and the temp light blinks red. I have checked the cleaned the air filter, but I still can't get it to come on. Any suggestions? Hi, if the Lamp error and Temperature error lights are ...
turns red, and the power light flashes red. Nothing is projected. I have contacted Hitachi, and was told to replace the lamp, and did so, but this did not fix the problem. Do you have any suggestions?
Question about Panasonic Office Equipment & Supplies
...hours of usage: replace lamp first!Good luck,Alex. ballast and bulb good. system fires up, no pic. blinbking green light turns red after about 2 mins and system shuts down. new ...
Question about Sharp Office Equipment & Supplies
...red), the lamp will automatically turn off and then the projector will automatically enter the standby mode. At this time, the lamp indicator will illuminate in red. If you try to turn on the ...
Question about Panasonic Office Equipment & Supplies
...RED than lamp runtime has reached 1800 hours. but projector still working. If LAMP INDICATOR light flashing RED than lamp circuit failure, or abnormal function or lamp unit is damaged. In this case ...
turns on both lights green for 10 seconds, then power goes red and status blinks green for about 5 seconds, then status light turns off green green is power on, normal then it tries to light the lamp,
...with a new replacement, however, when it is turned on there is still a blinking red light and the lamp won't turn on. replce lamp ballast board of your projector... reset lamp timer check your ...
Question about Epson Office Equipment & Supplies
...turns red and it won't do anything... This means that the lamp is burned out, not installed properly or the lamp cover might not be closed. Try to reseat the lamp, make sure that you close the over ...
195 questions posted
Usually answered in minutes!
230 Questions
104 Questions
82 Questions
96 Questions
62 Questions