shuts down shortly after powering up. Just before it shuts down the Power and temperature indicator lights flash in red and the lamp light flashes in yellow. Clearly the problem is temparature related
Question about InFocus Office Equipment & Supplies
plays for 1 hour and bulb shuts off and it says tring to restart it restarts for 5 seconds and the unit fan shuts off and it shuts of and read out says tring to restart please wait.leave sit for 10 to
Question about Eiki Office Equipment & Supplies
I replaced my bulb and it does not seem to be working. The projector power turns on then shuts off immediately a short circuit in one of the power lines on the mainboard is most of the time the reason
shuts down shortly after powering up. Just before it shuts down the Power and temperature indicator lights flash in red and the lamp light flashes in yellow. Clearly the problem is temparature related
Question about ViewSonic Office Equipment & Supplies
...shutting down solid red power and lamp lights PJ552 turns on operates great for around 5 mins then shuts off lamp light and power light are solid red flip. After turning off and back on I get same ...
no power I can get the stand-by red LED to work, but when pressing the power button to switch it on, the LED goes off and nothing happens. No fans, no light, no image, nothing. Anybody have any ideas ...
...seconds - and repeats all steps above. Capacitors? Overheating? It makes an image, but quickly shuts off. HI- The projector is overheating, try cleaning the filters for the fan. Hope this ...
Question about Epson Office Equipment & Supplies
Projector shuts off after about 45 minutes Our ceiling mounted projector shuts down completely after about 45 minutes of use. No lights are lit - no red light or anything else. No response to restart ...
Question about Eiki Office Equipment & Supplies
projector runs for warm up and shuts down in 10 seconds once it come on a broken fan, or short circuits om mainboard/ sub power boards.
...if so detach from circuit and test . If the voltage builds up and the set power ON and then shuts up then the suspected section must be checked in detail. The processor must have the +5 ...
195 questions posted
Usually answered in minutes!
230 Questions
104 Questions
82 Questions
96 Questions
62 Questions