Sharp XR-11XC Multimedia Projector "shut down" Questions

...shut down after about one minute of operation it detects overheating and shuts down. The main cooling fan immediately comes on to cool it down. All filters are clean HI there Is there any on scren ...

...shut down...it was not I have a View Sonic Projector PJ513D/P ...the projector would not shut down...it was not responsive to any of the tasks, such as shutoff, change the source, etc ..i had to ...

Shuts lamp dwons as if over heated. Lamp 4200 hours. The projector shuts down as if over heated. Lamp on low, filters clean, fan on high. Cold start and it runs for approx 1 h, then shuts down and ...

...down on its own at intermittent times. The bulb will shut off and the fan will run for a minute or two, then the unit shuts off. I can power it right back up, but I don't want to continue to do that. ...

...shut down mode (lamp first and fans run a while), reset the settings to factory default. while you're in the menu, check the lamp hours (under settings). if they're close to 2000 hours, replace the ...

...shut off the lamp ok Check the fan. Looks like heat building up inside and to prevent further damage, the unit is shutting down. The lamp gives out heat which if not ventilated out will result in the ...

...shut down properly. When the unit has been on for any lengthy period and it is shut off using the on/off switch on the rear of the unit, this shuts the whole thing down, fans and everything. If it is ...

...shut down projector if extreme heat is present, usually caused by dirty filters, fan failure, etc. Two, your bulb has reached its life end. has a shut off timer if idle for a while. you can reset it ...

...the projector work? Make sure not to shut down the projector after use. Wait until the fan stops. The fan is to cool down the bulb during and after use. Once the fan stops, then you can shut it

My ben q mp512 projector keeps on shutting down. it will open normally but after 30 seconds it automatically shuts down. the temperature light will go on as well as the lamp light is turned on. the ...