Sharp XR-10X Multimedia Projector "lamp turn wont" Questions

Projector wont turn on. The lamp light is amber.... Projector wont turn on. The lamp light is amber. Have you tried changing the lamp ?

lamp wont stay on. fan continues to work after lamp goes out. When power is turned on light comes on and fan starts working. with in a second or so the lamp turns off but fan continues to run. Most ...

...turn on. It has a red blinking light. I changed the lamp but it has not changed the status. I had this same problem with 2 NEC VT595 projectors. My problem was that there was a broken "tab" on the ...

turn on and the lamp/cover light is flashing even though we have changed the bulb and ensures all covers are closed, any suggestions? the cover switch is probably not fully made. Ensure that the cover

turn on lamp light is glowing red but the ready light will not turn on when you open the front lens cover?? Hi This is normally a clear indication that the lamp is in need of replacement. Take out the

...lamp timer before turning itself off. please help. Press the Auto button when it says it's going to turn off, then hold Exit, then when it tells you, press Auto again - worked for me literally 5 mins ...

...lamp wont turn on if there are no leds lit on the top when you turn the switch on, you have a bad power supply. if the leds are blinking, check your lamp door switch. if it's not closed, nothing will ...

...lamp indicator as well as the power indicator leds turn red after about 20 seconds of operation. Per the manual there may be a air blockage or dirty filter. I used canned air to clean the internals ...

lamp. Turn it on, fans are working, Green led is on, but the lamp won`t fire up. It tries to fire up for almost 2 minutes, then it turns off. Any help? once u remove the lamp and re fix it. if it also

...turn on after changing the bulb. How do do I reset 1,whether the lamp is ok? -put this lamp to another projector to check it 2,whether the lamp ballast is ok ? Have a good day! We supply original ...