...bulb life? hi, for replacing the lamp do yhe following. 1.Remove the lamp cover by pushing two grooves lightly with the flathead screwdriver. You can see the lamp cover on the top of the projector. ( ...
...bulb or lamp. The bulb must be cool before you take it out. Use a tissue or cloth to remove the bulb because the glass bulb is very fragile. Do not throw away your bulb yet, you may need it to help ...
Question about Sharp Office Equipment & Supplies
...Replaced both bulbs with brand-new bulbs. Now all I get is power light on steady (red) along with Lamp 1 and Lamp 2 lights flashing (red). How do I fix this problem? Verify that the lamp doors are ...
...bulb? Thanks To be honest, most people who experience short lamp life on the Infocus X2 is on the genuine infocus lamps. If you read the user opinions here, you'll know what I mean. Me personally ...
...lamp light indicates that there is a problem with the bulb. Mine did this when I had used the bulb past it's life and the bulb was burned out. Use the owner's manual instructions to remove the bulb ...
...lamp and inspect the bulb through the square opening. Look at the wires that connect to the top of the glass bulb if broken or the bulb is damaged, try to return it under warranty. The other issue ...
lamp change the bulb/contacts are not properly seated. Ensure the screws are securely fastened to keep the bulb seated. Are there any lights, i.e. power, bulb or fan errors lit? I've had my HD70 since
Question about Panasonic Office Equipment & Supplies
...Lamp indicator flashes red Is bulb dead? carefully take the lamp cover off, and see if there is any glass pieces inside. if all looks Ok, then unscrew the lamp housing and remove the lamp. check for ...
Question about Eiki Office Equipment & Supplies
...bulb burn replaced both bulbs worked for a couple of days but now it wont power up only lamp1 light blinking. I have tried taking bulbs out and putting them back in still nothing, also the lamp timer ...
...bulb has about 200 hrs of use. Reset the lamp hours as follows. Press the Exit button on the projector for 3 seconds to display the total used lamp time. Press the MENU button on the projector during ...
136 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions
