Question about Frigidaire Washing Machines
...5 minutes The machine wasn't draining so we unplugged is and turned it on tis side to unclog the drain pipe. When we put it back upright and plugged it in, the lights come one and when we try ...
how do you turn off the control lock on a whirlpool upright washing machine. if you mean front loader there is a button with small lock emblem underneath hold for 3-5 sec
...5 mins and back on. Unplugged as well. Held down cancel button and all others for 10 full seconds timed....still nothing. Machine is Whirlpool duel Model#9100LQ1 Ser# CSM 3808698 Blue upright the ...
...5 items of clothes with 3 large towels and two sweater many front loader washing machines don't have different water level options since they cycle the water differently than the "tub-o-soap" upright ...
...upright. Even though it may seem ok, these are notorious for breaking. (Same as Kenmore). The model number should be under the back edge of the lid. There are usually two philips head screws at the ...
...upright machine will not spin. The model number is located on the inside of the lid at the back. Usually you can remove two screws at each end of the control panel and tilt it back to expose the plug ...
...5 Select the Spin Only cycle. Press Start and let the washer drain for 1 minute to drain out all the water. (Not all of the RV antifreeze will be expelled.) 6 Press Cancel, unplug electrical power ...
...5). 17) Grasp the bottom loop of the yoke spring with a pair of pliers and engage the spring with the hole in the upper gear case cover (see figure 2). 18) Replace spacer in short gear case mounting ...
...upright post part of my washer's agitator will not engage. It's a two part agitator that has a base unit that will turn, but the post will not. If you press down on it you can feel ''teeth'' engage ...
582 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions