Kenmore Oasis HE 27082 Top Load Washer "damper rods" Questions

...damper rods whole top screws need to be removed usually two at the top front and two at the rear, then lift one rod upwards so you can remove white or yellow tapered support cup the remove the rest ...

rods under the tub tabs there is an air and piston type damper around the springs the top breaks out and the damper action is lost ( cost around $90.00 AUd for set of 4 check the tub level by removing

balance rods issue. constantly throwing machine into unbalanced error. Your Aquasmart machine requires 4 new suspension damper rods & 4 top bands, these are a common problem for AquaSmart machines

...damper rods or tub springs at the bottom. Check the knuckles for the rods - that they are firmly in place with no buildup in the knuckle or breakage. Thanks for using FixYa - a 4 THUMBS rating is ...

...rod in it. Look on the right side and see if its there. If it's not new, it most likely needs the dampers.

...damage during transportation. These rods MUST be removed before the machine is used, otherwise the dampers that prevent excessive vibration will not be effective. The user manual should provide ...

...damper rods to be sure that... 1. They are there and mount is solid. 2. If they are broken in 1/2. 3. The plastic knuckle mounts are not missing/broken. 4. There is oil in the shock absorber/spring ...

...damper rods to be sure that... 1. They are there and mount is solid. 2. If they are broken in 1/2. 3. The plastic knuckle mounts are not missing/broken. 4. There is oil in the shock absorber/spring ...

...damper rods to be sure that... 1. They are there and mount is solid. 2. If they are broken in 1/2. 3. The plastic knuckle mounts are not missing/broken. 4. There is oil in the shock absorber/spring ...

...damper rods to be sure that... 1. They are there and mount is solid. 2. If they are broken in 1/2. 3. The plastic knuckle mounts are not missing/broken. 4. There is oil in the shock absorber/spring ...