...in place. Pull the handle and the door will open. Put the handle back into its slot and put screws back in place. Check the drain pump while you're there to make sure it is free of foreign ...
...is disconnected. With the hatch open, remove the screws holding the red plastic handle in place. Pull the handle and the door will open. Put the handle back into its slot and put screws back in
...and all lights go off. approx 30sec later the door open light comes on and the door is unlocked. what causes the flashing door open light? try unpluging for one min. then plug back up.hope this ...
...open the door. Remove the door gasket retaining hoop by stretching apart the retaining spring at the bottom of the door opening. Gently peel the part of the door gasket near the door lock/latch ...
...back to open the lid. Everything is tight, and nothing seems loose. The plastic end caps on the console don't seem to want to come off, and it seems to be a continuos piece of metal that forms both ...
Question about Kenmore Washing Machines
open the top of my washer . there 3 screws on the back u take off but to take door latch off u dont need top off u open your door take the spring off the front of your boot then remove the screws from
...I open the back of the unit? Is there something I should be looking for? a belt ? does the back of the unit come off and go back on easily? If you are handy open the back. Look for worn brake
...there is a little pin on the back of the machine you should press in a hole (also on the back) and then you can open the door. To meme sure it is like that, check the manual. I hope this will
still won't open. When I plug it back in the door locked light is back on. Hi, Press and hold the End of Cycle Signal button for three seconds. This will turn off the Control Lock feature. Thank you !
361 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions
