...shock Hi, We have a 2 years old Kenmore HE2 (46462). I think the shocks are goner. The spin cycle shakes really bad. How easy is it to replace the shocks? Do I need to remove the drum and rest of the ...
Question about Kenmore Washing Machines
he2 front load washer model 110-46462501 shakes and moves on the rinse and spin cycle. Replaced shocks and bearing is fine. Don't know what's wrong. he2 front load washer model 110-46462501 ...
...HE2 washer, extreme vibrations in spin cycle. Check the Vibration damper rods to be sure that... 1. They are there and mount is solid. 2. If they are broken in 1/2. 3. The plastic knuckle mounts are ...
he2 washer shakes violently Washer shakes violently during spin cycle, especially at beginning and end of cycle. Check the Vibration damper rods to be sure that... 1. They are there and mount is solid
Question about Kenmore Washing Machines
shock absorbers near the coin trap is broken off the mounting. I figure the extra bouncing probably caused the coin trap to wear out. I get the parts on Wednesday. Do you have any suggestion, warnings
shaking itself to pieces our front loading washer is shaking itself to pieces. it has broke one of the bolts that attach the drum to the washer frame. it is on a hardwood floor and the feet are level.
he2 plus Check the Vibration damper rods to be sure that... 1. They are there and mount is solid. 2. If they are broken in 1/2. 3. The plastic knuckle mounts are not missing/broken. 4. There is oil in
BANGS LOUDLY ON FINAL SPIN REPLACED SHOCKS NO DIFFERENCE Pull the lower front panel off and check the filter on the pump housing. If it is restricted it may not be getting enough water out of the ...
Question about Kenmore Washing Machines
OK- my Kenmore He2 won't spin fast enough to drain when there is a heavy load involved. This is what I've done- emptied the filter- lots of change and other gunk, cleaned out attached hoses and the p ...
Question about Kenmore Washing Machines
making a loud clunking noise and will not spin the laundry very well It is time to call a tech, it is time to take it apart to see what is going on. Turn the tub by hand. If it feels like it is ...
361 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions