Question about Kenmore Washing Machines
...drain), remove filter and voila!). Found one sock, a quarter, and some other junk clogging the drain. Saved $55 house service call. Thanks all! Draining the water pump helped slove my F02 problem Did ...
...drain pump filter for foreign objects. To access the drain pump and filter remove the front kick panel and trace the drain hose to the bottom of the washer, drain pump would be located there. If you ...
...make sure the pump is running. Check the drain pump filter for foreign objects. If the above does not correct the problem, replace the pump. Hope this helps (remember to rate and comment this
...drain motor when yo removed the filter for cleaning? If not please see the extract of my guidance notes ;-0) REMOVE POWER Now- whilst the filter is removed it is normally possible to see the drain ...
...filter drain plug. Water will start comin out if you just barely open it. (easier to try to keep water from going under the washer). When the water slows unscrew the cap all the way and this wonder ...
...Quietpak 9 HE 4t - Model 11045991400. Have been getting FH code on and off for past two years. Clean filters on top and bottom. Sometimes I would unplug and reset ckt breaker and it would work. ...
...drain hose is kinked or blocked...Or the pump filter blocked or pump is faulty. Most likely the filter needs to be cleared. This should be accessed via a small hatch at floor level. Or behind the ...
361 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions