Bosch Nexxt Premium WFMC6400UC Front Load Washer "800 series washer spin" Questions

series 800 is not working properly. When you set the Control Cycle knob to start a normal load it agitates instead of filling up with water rinses instead of stopping the load etc. We've tried turning

...Series WFMC6401UC Front Load,wont spin at times water lays in bottom and all cloths are wet. There is a 800 and 1200 rpm cycles and both do the same, Get engineer to check the carbon brushes on the ...

...800 series starts to agitate before reaching correct water level, also while filling up with water it pumps some out but will eventually fill and wash through the cycle. It appears to not be spinning ...

...800 Series Washer I have the same problems with my Kenmore washer... on the spin cycle...it makes noises like it is spinning but it is not spinning? I see allot of these problems posted...Does Sears ...

...800 series washer not draining; stops at that cycle; have to manually turn dial to spin/drain cycle to get it to finish; Need to trouble shoot n fix. Help? After you advance the knob, you are saying ...

Kenmore 800 series washer siphon break connector replacement Leaks out the bottom during the spin cycle. Not sure which one you need but take a look at these.

...fills agitates and drains but wont spin kenmore 800 series sounds like you need a drive coupling. tip the machine back and remove the motor and pump. the coupling is between the motor and

a Kenmore Washer 800 Series and the spin cycle is not working. It makes a strange noise and does not spin properly leaving the clothes completely wet. Thanks for choosing FixYa and welcome to the site

...800 series - washer doesn't always spin dry enough I have had a problem with wash not spinning enough and the clothes have a lot of water still in them at the end of the cycle. As there is not a spin ...

...800 series washer started draining but stopped 3/4 of the way and now won't do anything at all Checked the outlet by using a small appliance, it worked fine and tried to reset the washer by ...