Question about Whirlpool Washing Machines
...a very unbalanced load can cause the water to go over . yes the tubs are supposed to be able to move around some.run a load with no clothes in it if it leaks then you may have a more serious ...
Question about Roper Washing Machines
Water splashes out from underneath the top on my washer. I was wondering if maybe there was supposed to be some kind of gasket around the bottom of the top or do all roper washing machines do that ...
Question about Washing Machines
...water from the tub depends on what u mean by agitator works fine on spin? it doesnt do anything on spin cycle cause its not suppose to? if ur saying ur not getting any wash agitation? then I suspect ...
...water is supposed to go thru the recirculation hose. You want to check that diverter valve first and formost. That's going to tell you what you need to know. Look closely at it and you'll see if the ...
...water to seep out of the diverter when it is supposed to be sealed in the spin or drain cycles and this seepage will get on the tub's rim as it spins and cause a leak on the floor. This kind of leak ...
Question about LG Washing Machines
...water *is* supposed to be able to get in there, and it's not draining properly. I have photos, and I'll see if I can post them, because they're sobering. Other than leaving the door open when not in ...
...underneath. The panel will drop and come off. Drain off the excess water from the drain pipe you see. The white filter cover is right in front. Get yourself a good plastic bag to collect water. ...
...supposed to.Sears Tec replaced tray to try and fix ; tthis did not correct problem . this works on a siphon action when water in a small amount is added to dispenser, apparently water is not getting ...
Question about Kenmore Washing Machines
...water supposed to come out and doesnt. then single beeps after beeb after beep. i tilted the machine on its side so i can remove the bottom to find the leak. did that do something to it? i dont know. ...
water pass through even when it is supposed to be shut. Try turning the water off to the machine every time after you use it and if water stops going in while its off, replace the inlet valve/solenoid
350 questions posted
Usually answered in minutes!
992 Questions
874 Questions
371 Questions
398 Questions
323 Questions