GE WBVH6240F Front Load Washer "rubber drum" Questions

...from hole in machine (end of a spoon helps) then push drum back through the hole and you will see a large clip on rubber to the drum, unscrew clip and pull out rubber, reverse to replace. Good

won't spin will not spin or drain, smell rubber Sounds like a loose or worn belt, a bad drum bearing, or something is jamming the drum. The rubber smell is the drum belt slipping.

...Is this possible to take out the Drum or has anyone got a better idea for replacing this rubber Gasket ? easy fix if you watch this video How to replace washing machine door seal on Hotpoint ...

lucky you'd be able to reach it wit your hand or some tool. Still that would require a lot of work, luck and wouldn't come out without expenses for new rubber hose since they are usually glued to drum

...shocks to keep it balanced so check both for damage. _( cracks in rubber shocks and breaks in washing drum spring or springs ) Also springs or rubber shocks are no longer fastened to motor or

Rubber band on drum keeps slippig off The big rubber band is the belt. Check the idler pulley at the motor ,make sure the belt is threaded on the pulley right and the belt is where it should be on the

...drum and rubber seal is small. Open door and turn drum by hand. Look carefully and see if the drum has an uneven wobble which is touching the rubber. If it has, you need to send the machine back or ...

...rubber in washer check the inside stainless steel drum isnt moving up and down. use the plastic outer drum as a reference. If its wobbling up and down, then your drum is bad. If it isnt then for some ...

...rubber smell, drum won't turn I have a Maytag LAT9420AAE washing machine. It was in the spin cycle, and started making a burning rubber smell. The drum was not spinning. I replaced the belts, but it ...

...rubber smell - either the drum belt has melted and snapped or the drum seal has rubbed too much and melted. Most likely cause would be poor drum bearings or consistent overload of washing. I am ...