...water supply valves behind the washer are fully open. In winter, check the fill lines for freezing. Check the drain system for a siphon problem. If the water valve assembly is defective, replace ...
...washer can be operated in this condition for testing 1 Rremove the air hose, and blow it out. often water remains in the tube after changing levels, the water is not compressible so a small change in ...
water level on top of the washer; make sure it is in the center. Take a look at the level and see where the bubble is in the water level? Accordingly you have to lower or raise either 4 corners of the
washer leaking water from underneath my husband and i found the problem. The drum in the middle of the washer is not centered so when i turn the water on it the water leaks out. how can we fix that ...
Question about Kenmore Washing Machines
...water level switches and pinched or clogged hoses connected to the level switch. The top of the washer may have to be removed if it is not accessible from the back. to prevent small hose connected to ...
...is a water level switch that monitors the water level in your unit. this switch has failed. replacing this switch will fix this issue. It is located inside the washer near the water valve
...Washer Water Level Switch (part #W10337780) - How To ... ? 7:16 https://www.youtube.com/watch?v=oi8uUPFgxbI Aug 23, 2011 - Uploaded by AppliancePartsPros Buy the new Water Level Switch W10337780 ... ...
water level on top of the washer; make sure it is in the center. Take a look at the level and see where the bubble is in the water level? Accordingly you have to lower or raise either 4 corners of the
...water that enters the washer. It probably needs fixed. Thank you for choosing FixYa. Easy fix. No parts needed. All washers have a water level switch of some sort. Each switch has a small rubber tube ...
497 questions posted
Usually answered in minutes!
992 Questions
874 Questions
398 Questions
323 Questions
255 Questions