Sony VPL-ES3 Multimedia Projector "lamp cover 3" Questions

lamp/cover light stays on! brand new lamp have had projector serviced, sometimes works sometimes does'nt. Please help this is the second new lamp both have worked for 2/3 films then lamp/cover problem

...lamp cover by pushing two grooves lightly with the flathead screwdriver. You can see the lamp cover on the top of the projector. ( left side of the lens) 2.Loosen the two screws securing the lamp ...

...lamp cover light flashes three times repeatedly if i hit the on button projector will come back on and work for a few mins again the turn on and flashing lights start again Here is a link to the ...

...the power cord. 4. Use a screwdriver to remove the screws from the cover. 5. Push up and remove the cover. 6. Remove the 2 screws from the lamp module. 7. Pull out the lamp module. PLEASE RATE

lamp cover. 3. after that remove 2 screws of the lamp and pull out lamp by grasping the handle. 4. replace the lamp with a new one and tighten the 2 screw s back in to position make sure that the lamp

...lamp cover and the air filter cover of the projector body if the projector does not power on. Ensure that the power cable is firmly connected to the projector and an active power plug. If the ...

...the screw from the cover. (1) Push up and remove the cover. (2) Remove the 2 screws from the lamp module. (3) Pull out the lamp module. (4) To Replace the lamp module, reverse the previous

...cover. You will see the lamp assembly. On the right is a white cable connection. Disconnect it. On the left is one screw securing the lamp assembly. Unscrew that, then lift the lamp assembly out of ...

...lamp/cover error where the lamp/cover led blinks and the machine does not light. The problem is still there even after i press the lamp cover switch manually. what else could i try? The small lamp ...