...no projection, and it won't come out of that mode unless I shut it down and don't turn it on again for a few hours. check your fan if not turning it will work for a shorter time and goes to
Question about Compaq Office Equipment & Supplies
...goes back to standby mode again, and so on. Does anyone have an idea where it may come from? The lamp seems ok, otherwise I would not see the image for the first 15 seconds! check the ventilation it ...
...after bulb change Simple. Press the Help button on the remote control for a minimum of 10 seconds while in standby mode. When the lamp time clock is reset to zero, the STATUS indicator goes
Question about Compaq Office Equipment & Supplies
...goes to standby mode Anyone have any problems with this. When I press the power button on either the projector of the remote it goes into standby mode. But this will automatically come back on after ...
...goes out. ...But the "Lamp" LED's been OFF the whole time! Do I hold down the "Help" button while the machine is in standby mode (Power LED static Orange), or whilst the lamp is ...
Question about InFocus Office Equipment & Supplies
goes into standby mode with the orange light on top. Never turns on. Can't get it out of standby. depending on the age of the projector it is likely the power supply. If the serial # starts with ANEL5
...goes in standby mode. For some time the cover would just close in the middle of a movie. So we taped it, and that worked just fine. I checked all the screws they are ok. Help? my sony projector ex100 ...
Question about Optoma Office Equipment & Supplies
standby button while it is flashing green, it goes to a solid green but in about 30 seconds the orange light next to the lamp icon comes on and stays on for about 2 minutes, then the projector will go
...goes into standby mode after about an hour of watching.... the device gone warm which may cause follwing reasons:- 1. it may cover with somthing. 2. used in warm environment 3. heatsink/fan gone out ...
Question about ViewSonic Office Equipment & Supplies
...goes to standby mode back again. It never warned that Lamp needs to be hanged. I have replaced an old lamp with a new one and it did not help. Brought projector to a service center and they couldn't ...
47 questions posted
Usually answered in minutes!
94 Questions
59 Questions
55 Questions
35 Questions
28 Questions
