Panasonic PT-LB50U Multimedia Projector "blinking red light 6" Questions

red is still blinking on the 6 cycle. Is the projector receiving a source signal? if not it will power itself down after whatever time you have it set to do so when no signal is present. Just an idea?

Red 6 times blink (Lamp Error). I've put back in the old bulbs...same thing. 1 red blink every 2.5 seconds indicates a cover error-- for this check the lamp cover 2 times red blinks very 2 seconds

status lamp blinking orange 6 times PROJECTOR. NEC VT491 THE STATUS LIGHT IS BLINKING 6 TIMES RED, AND THE POWER LIGHT IS ORANGE

my lamp light stays on my status blinks if it's blinking red, how many times? 1 time- lamp cover. 2 times- overheating. 4- fans. 6- lamp. if the lamp led is lit red, replace the lamp.

...blinking red, power button orange nec vt700 HelloLook at the number of blinks of the status light.[1]  If it blinks at one cycle (0.5seconds On and 2.5seconds OFF) : Lamp cover error or lamp ...

...light switch to red, and they both blink twice, several times. The the power light stays solid on red, and the status light blinks 6 times on red, pause, 6 times on red, pause... etc etc. I have held ...

...blinking red status lights) mean the lamp needs to be replaced? or could something else be wrong. According to NEC technical support, if the status light flashes red six times, this could indicate a ...

...blinking red ( fast blinking) & it shuts off. this is an NEC VT 660 about 3 yrs old. the lamp has been changed in the last 6 months. according to the NEC user manul the lamp housing is not right, but ...

red light 6 times is a lamp error. either the lamp is old and wont start up or the ballast power pcb is not working. can you hear the sparking of the high voltage trying to strike the lamp. if you can

red light blinks in a series of 6 blinks. It also has a very hit frequency squeak that comes and goes as the fan pulses..I have changed the bulb and that is not the problem (unless I got two bad bulbs