Kenmore 84052 Dryer "flex exhaust hose" Questions

Ad

Question about LG Dryers

1 Answer

...exhaust flex hose are removed and cleaned. If you have the plastic type flex-hose, be aware that these can heat up and catch fire. Be sure to also check the exhaust port coming out of the dryer (that ...

Ad

Question about Maytag Dryers

2 Answers

...a back draft in dryer I would simply look at the internal exhaust tubing inside the dryer and verify it has not come loose. Its very simple to access and look where it attaches first to the flex

Ad

vent? SHOULD JUST NEED A 4 INCH VENT HOSE AND TWO 4 INCH HOSE CLAMPS NORMALLY COMES AS A KIT... I WOULD RECOMMEND METAL FLEX HOSE INSTEAD OF THE PLASTIC STYLE AS IT DOES GET HOT WHEN EXHAUSTING AIR...

...the exhaust system ther is a clog between the end of your flex hose and where it exits outside,to ck run the dryer and check for airflow at outside vent.should feel pleanty of warm air coming out ...

...exhaust through a roof although I would not do this unless it was the last resort. Instructions for the dryer hook-up are included with the materials. It consist of connecting a vent hose usually 4 ...

Question about Hoover Dryers

1 Answer

...clothing.. Test by starting unit and going outside to the exhaust vent and checking for a good warm flow of air.I suspect the whole system will need cleaned not just the flex hose behind unit Good ...

...a Kenmore 800 electric dryer from Sears. What is needed to change the exhaust to vent on the left side (if I'm facing the dryer)? why don't you just go to home depot and buy a longer flex ...

...exhaust.Flex hosing builds up due to condesate you are exhausting. Otherwise check continuity on limit switch on exhaust tube .Some models let motor run even though elements get shut down. Simple ...

...it's going off on a high limit switch. Check and make sure the exhaust flex hose is clear all the way to outside and make sure lint filter is clean. If all is clean, you may have a bad limit

exhaust of dryer out side rather then from back get a flex hose and bend it around make sure it isn't pinched and vent that way, you can get at the hardware store Venting the drier outside makes sense

Not finding what you are looking for?
Kenmore 84052 Dryer Logo

81 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...