Kenmore 95087 Gas Dryer "blow coils" Questions

coils on the same way you take them off.vac out the dryer also,lint buildup will also make the dryer take a long time to dry,check outside and make sure the air is blowing open the flapper,if not blow

my dryer will not blow or turn. the heating coil went first... then i did something stupid and hooked a heater to the blower which worked. but i fell asleep and the heater kept heating when the dryer ...

...blow out and not get blocked.the part number for the coils is 279834 and they are around 25 dollars,unplug the dryer,remove the bottom panel,remove the two phillips head screws,remove the cover,slide ...

...blow cold after a while. clothing in full cycle never completely dry ..ive replaced the heat setting/selector switch but that was not the problem. if it heats for the first 15 to 30 minutes then no ...

...coils,put it back together and you'll be fine,also while you're in there,get a shop vac and vac out the cabinet,stick it on blow and blow all the lint off of the motor and out of the gas ...

blow out.you should do this once a year so you don't have a fire.if you have any other problems i'll be glad to help you. https://www.youtube.com/watch?v=xGIG8Wo5-N4 It's a bit hard to accurately test

...coils is heating are you sure motor isn't running or just the drum not turning ? if drum not turning suspect belt ..if motor not running but element still heating suspect element is contacting outer ...

coils that line up with the cover and a metal spacer on the large coil that slides onto the post,if you don't see the spacer on the post poke it out of the old coil and slide it onto the post and then

Samsung DV350AEW electric dryer, runs, blow cold air only. Heating coil is fine, just changed to a new coil and still no heat. If no clothes in the dryer, time automatically shortens to 1 minute. ...

...coils.also while you're in there get a shop vac and vac up all the lint you see,remove the lint filter and then remove the duct that the filter slides down into and clean that,then set the vac up to ...