Question about Whirlpool Dryers
My washer always gets unbalanced load with 7 minutes remaining. When left on the default settings, my washer will always go to "UL" with 7 minutes remaining. I can sometimes circumvent this by putting
Question about Frigidaire Dryers
Stacking Frigidaire dryer on washer using stacking kit 5303937141 So-- I have a Frigidaire washer and dryer from 2000 and stacking kit 5303937141... two brackets essentially - I'm looking for ...
dishwasher We put jet dry dishwasher cleaner (not soap) in the rinse agent container of the dishwasher but realized it before we ran the dishwasher. What can we do? go and stop at SEARS and buy some ...
washer is not spinning fast enough clothes are wet at one point i think i put in too much soap and it said draining problem If this is a HE front load washer. MAke sure your drain hose is not shuved ...
Question about Samsung Dryers
...the clothes are stuck to the sides but are still wet. I have already calibrated and balanced the washer and it worked fine before the pump so I didn't know if this is related to replacing the pump ...
Can I have my broken door fixed? The door clip was broken, it can not be properly closed, so the machine does not start working even you turn it on. A door clip don't cost much go to an appliance ...
Why does it leave black marks on clothes? Your problem might very well be in the WASHER, not the dryer! If pieces of mold/mildew are in the clothes from a dirty washer tub, they will be dried into the
am i aloud to put my dryer on top ov my washer Acceptable. Think safety to avoid slippage of toe dryer on top of the washer. A rubber base on top of the washer will be a good start.
Bosch WTL 5410 dryer condensation and washer I have had a condensation washer and dryer for 4 yrs, I am now getting it hooked up. The amps in the box is 20 with a 10 gage wire. In the book saids 30A ...
Question about Kenmore Dryers
When I put a light load into washer, follow directions, the washer starts by running water but does not go into next cycle I would check the lid switch. If switch is faulty, it will allow unit to fill
1,774 questions posted
Usually answered in minutes!
1,329 Questions
750 Questions
524 Questions
182 Questions
177 Questions