Kenmore Elite HE4 Electric Dryer "pass switch" Questions

Ad

Question about Fisher and Paykel Dryers

1 Answer

...i bypass door switch that is not working properly? you dont want to by-pass the switch ,,,, its on there for safety and if it is by-passed it can cause problems with dryer or worse could start a

Ad

...pass ,could be on of switch relay? Hello, If I am reading this correctly you have an electric dryer with no heat..you have checked oll the usual suspects like heater coil, breaker, thermal fuse the ...

Ad

...onoff switch for space heater that shorted out Can I bypass the on-off switch and just wire straight from the wall ******* to by pass control switches safer and cheaper to replace the faulty ...

...nothing happens. I have check the switch and it seam to be ok. i have try to by-pass the switch but no luck there. You need check electric diagram maybe: fuse line is broken door switchs is ...

...Dryer Time keeps going forever I have neptune dryer MDE3000AYW, the dryer never stops the timer passes ver off position and never stops it keeps going. The only way to stop is to open the door. ...

Question about Maytag Dryers

1 Answer

switch. Try a different heat selection (low / perm press / regular and see if the burner lights. If it does light then it is most likely a thermostat. Without a model number I can not pass you specfic

...pass the door switch and the push start button Just tape the two lid switch wires together and this bypasses the lid switch. Its not neccessary on start button If this was helpful please rate me. ...

Question about Kenmore Dryers

1 Answer

...DRYER DOES NOT START AT ALL CHECKED THE 220 POWER AT THE DRYER,THAT IS OK BUT NOTHIING HAPPENS,BY PASSED THE DOOR SWITCH ALSO sounds like the thermal fuse on the back inside vent, or start ...

my dryer cuts on and then off I have by passed the thermal cutoff fuse and the door switch it will turn on when I plug it back in and run a few seconds and then cut off please help does it run as long

Question about Roper Dryers

2 Answers

...switch tripped On the back of the drum is a thermostatic safety switch make sure the contacts in this switch are clean and not burnt therefore not allowing current to pass to the heater ...

Not finding what you are looking for?
Kenmore Elite HE4 Electric Dryer Logo

1,774 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...