Kenmore Elite HE4 Electric Dryer "humming noise" Questions

humming noise and wouldn't turn over. Do you know what it might be? belt may have broke. if you are hearing a humming sound . thats the motor .whitch is good, sounds like the belt broke or slipped off

...humming noise and quit Something caused the motor to lock up. The humming noise was the start winding in the motor trying to start rotation, but could not because of lockup. The humming noise stopped ...

humming noise when i press the start putton humming noise when i press start and drum acts like its froze up. When I push the start button it would hum if I hold the button to long and then it would ...

...humming noise . The dryer works good but makes a loud humming noise when it's working . Hi, The motor is going bad and this will make that loud humming when it is running... Dryer Repair - The Dryer ...

humming noise I can hear a humming noise when I push start button but drum doesn't turn. the humming noise is from the motor,see if you can spin the drum by hand,if it moves you have a bad motor,if it

humming noise 2yr old amana dryer started making loud humming noise so i immediately shut it off ! havent turned it on since. Hi, Here is a tip that I wrote about dryers and noises... It will help you

...humming noise. I turned it on and it shut itself off. So I turned it back on and the drum wouldn't spin but made a humming noise so I turned it off. My boyfriend looked at it and made sure all the ...

...humming noise and not turn on when I try to turn it on it just hums or clicks and does not come on a humming noise is usually a sign of a bad motor bad windings usually might run a short while then ...

humming noise is heard. The dryer will start after holding button for a couple seconds but how long before it wont start at all? Please advise! Thanks.Kim If it just hums the motor is probably on it's

...humming noise after running two loads. We then have to shut it off and let it cool down completely before running it again. the humming noise is most likely your motor. does it overheat or shut down ...