Kenmore Elite HE4 Electric Dryer "he3 thermal fuse" Questions

...HE3 dryer stops drying with code E1 Hi, how are ya? The E1 is a thermistor problem. It's a little black fuse that's next to the thermal fuse on the duct housing. It's pretty easy to fix. You need to ...

he3 gas dryer not heating not heating thee a lot compenents in the heat circuit it could be any one of them , starting with the thermal fuse,thermostat, safety valve ,glow bar, and flame sensor

HE3 gas dryer does not start at all. When I open the door, the interior light goes on indicating that elec. power is not the problem. I have tried all the buttons on the control with no results. HELP!

...HE3 dyer. It turns on acts like it working just fine but there is no heat. I have replaced the thermostor, and heating element. Do you have a clue where I should go from here? check the thermal fuse ...

...HE3, 11084836201, will allow me to select the drying cycle, but it will not start. Once I press the start button, it clicks but will not start. Please help! This problem is commonly caused by a blown ...

...he3 washer and dryer set. the dryer will not work at all. i got it used a year ago and it has worked fine until today. when i tried to turn on my dryer today, there was no power at all. it is plugged ...

...HE3 DRYER HAD TO REPLACE THE THERMAL FUSE AND THE THERMISTOR, DRYER STARTED FINE DRYED ONE LOAD AND BACK TO NOT STARTING THE CLOTHES SEEMED HOT WHAT WOULD CAUSE THESE TWO FUSES TO GO. THE AIR WAY IS ...

...HE3 gas dryer does not heat up? What do I do? Hi Thanks for using FixYa. The first thing that should be checked is the Thermal fuse which is mounted to the exhaust duct inside the back cover. If this ...

HE3 dryer that is overheating. I have had to replace the thermal fuse twice now and it still overheats. The airflow is good and the thermostat tests good. The fan is blowing well also. What else could

...thermal fuse trips cutting off power to the motor. I recommend replacing the heating element, and the thermal fuse. Be sure to check for a blocked exhaust vent before starting the dryer to prevent ...