GE DWSR483GB Gas Dryer "wont ignite" Questions

wont ignite dryer turns on but wont ignite. any suggestions? Hi thanks for the question. Most times a failure to ignite the igniter is caused by the thermal fuse located at the back, on the air duct .

My dryer is not igniting. I replaced the igniter, still wont heat My dryer is not igniting. I replaced the igniter and still nothing. The igniter glows but does not light the unit. What is the problem

igniter lights but wont fire igniter lights for about 3 sec. but it wont fire You probably have bad coils on the gas valve.

the ignitor wont turn on its a brand new ignitor and it wont turn on The over temp. safety switch located at the back top of the dryer interrupts the circuit to the igniter. If it is unhooked or ...

Dryer wont heat up model DBXR463GD1WW wont heat, all ducts are clear and cool air is leaving the unit. Any suggestions? The most likely cause is a burnt out igniter. (part # WE4X739) The igniter is a ...

...wont continue to ignite changed coil and fuse.can see on the front panel that the igniter glow but it wont continue to burn. On the gas valve itself is a set of operating coils . One has 3 wires the ...

Turns on but wont heat up Frigidaire Gas Dryer GLGQ2152ESO turns on but wont heat up Thanks Denise Check the following areas to combat this issue. the most common problem spot will be a blown Thermal ...

wont ignite at all, In March 2009 had problem where it ignites & ran for 5 mins but then went out and had ignition model replaced at that time I thought. Any ideas what the problem might be? http:

...wont release gas and ignite even though the igniter turns red it could be a few things, could be the igniter itself not getting to the amp peak needed, or the sensor not working... ...

...Comercial Dryer model HD50G1 hi .my hd50g1 wont light up . we had a problem with the motor and had that rewound, now it wont ignite....it starts spinning and everything except no gas flow or