Sharp AR-BC260 Color Copier "enter code copies" Questions

...enter the simulation mode. "#" key Interrupt key "C" key Interrupt key Main code Start key Sub code Start key Usual "reset" codes: 14 - Trouble cancel (except for U2) 16 - U2 trouble cancel 20 - 01 ...

...Enter the code you just learned, select "Copy Track Mode," and change it to "Off." Exit the mode and you're good to go. Alternatively, you can select "Copy Track Data," and note the access codes (or ...

...code is sc 550 return SP1-902-1 to 0. Then, the SC will be cleared. Press the Clear Mode key. Use the keypad to enter “107”. Hold down Clear/Stop for at least 3 seconds. The Copy SP ...

...14 copies. Then follow the screen directions to clear the fault code. Should be enter 1 then press start. The machine will reset and should be fine. I got h4-00 error code in my photo copy

code will come on after a certain number of total prints, depending on the model.  Enter service mode by pressing # * C *, enter number 24 and press the copy button, then enter number 4 and press

enter below) Main code {22} -> (Green Copy Button) Start key -> Sub code {07} -> (Green Copy Button)Start key Press the "CA" button to go back to Copy mode. i have a problem about Sharp copier AR M207

...code 42 F5-42-0 set 42 to"0" no accounting,51-0 no copy account,52-0 no FAX account To enter service mode,Function,copy, "3" simtameously default password 00000000 if changed willrequire a service ...

code will come on after a certain number of total prints, depending on the model. Enter service mode by pressing # * C *, enter number 24 and press the copy button, then enter number 4 and press copy.

...Enter the code assigned to the desired subfunction from the 10- Key Pad. ? Do you know the code for Copy Track? ➜ To select Copy Track, enter ?1.? ? Do you know the code for Disable Auto ...

...The copier display must go off, if not repeat and increase pressing speed. Enter the desired number and press copy key. If it has sub-code, then enter it and press copy key.This is the