TCL LE32HDF3300 32 Inch LED LCD HDTV "tv power supply using" Questions

...on the power supply, look at the voltage on the output part of the label. If it is higher then the input voltage on the TV, DO NOT USE THAT POWER SUPPLY! IT COULD DAMAGE THE TV! Hope I helped! ...

...tv on the power button shows its on but no pic or sound the power supply of your TV must be check.the power output of the power supply suppose to be 12 volts for audio,24 volts for the backlight lamp ...

...supply (Philips TV power supply). Replaced the cap in the Apex LD 4088. I am a TV Repair, and save almost everything. But your TV will come back to life. Thanks for asking, Matt of Martins TV

...TV power supply board TV still won't turn on what else could do this Hi Charlotte, I appreciate your DIY approach, but power supply is not responsible for no power on every time. Before replacing any ...

...TV. Power on the TV to apply voltage data. Check the power supply output.5vdc for main board supply,12v for the sounds and 24vdc for back-light inverter. If any of the 3 supplies are missing or got a ...

...TV will not turn on using remote or manual power button It might be the power supply board. There is a repair service which addresses any problem with the power supply board, not just bad capacitors: ...

...tv has no power at all. A pleasant day!!! The problem of your TV is in the power supply board. Kindly follow this procedures to solve your problem: Remove the back cover of your TV. If your done ...

...TV is the power supply board. Please follow this procedure to fix that problem: Remove the back cover of your TV. After that,look for the power supply board. Next,check the input voltage of the power ...

...TV and power it ON.Check the input voltage of it,using multimeter (AC range).If the power supply have no input voltage the problem could be the power cord.Replace it. If the power supply have the ...

...TV the power is flowing and is close enough to the correct values for the TV to stay on, after being shut off the TV will not turn back on because correct voltage is not present until the components ...