Sharp Projector lamp Projector Lamp "damaged ballast" Questions

Sony KDF-E50A10 Loud pop, now no picture or sound, just flashing red LED Just replaced the lamp on Sony KDF-50E2000.Set won't power up.The red power light flashes at 3sec intervals indicating that the

ballast, before that just do a quick check on the small switches which are under the filter cover. if the cover locks have got damaged then the switches will not close and hence show a similar problem

ballast could've been damaged by the defective supply. Also, try a known-good lamp...just to rule out a defective new one--in the shop, we kept all old working lamps as testers. just replaced lamp and

ballast may have gone bad, you could have gotten a bad bulb, or a capacitor may have become damaged. A damaged capacitor will be bulging at the top, even if it is a slight bulge, it is still bad. Look

sharp projector turns on and then cuts off right away - any ideas projector was working but then we moved it and it now will power on but then clicks off right away? Hi there First take out the lamp ...

NEC projector LT220 - replaced bulb, works for 1.5 hrs then switches itself off Fault developed after replacement of bulb. Projector fires up, works OK for about 1.5 hrs, then shuts down with red ...