...will not open Please try these.. hope any one might open the tray.. 1. use a thin needle to insert in the pin hole near the CD tray. 2. my computer--> cd drive--> right click&press ...
...below thr CD drive tray. Straighten a paper clip and insert it into this hole and gently push the paper clip until the drive tray pops out. You can then pull the tray out to the fully opened
...CD driver to open. Smile! Just below the drive tray on the face of the drive should be a small hole. A straighted out paper clip can be inserted and should unlock the tray to where you can pull it ...
...tray. Unfortunately, with the system still running, the drive will fight you. Shutdown the system and then try using the pin in the hole to release the CD. That should resolve the removal problem. As ...
Question about Dell Dimension Computers & Internet
...CD tray will open then automatically close before I can insert the CD Open "My Computer". Click with the SECOND (usually the RIGHT) mouse-button on the icon for the CD drive. Click EJECT. The drawer ...
Question about Dell Dimension Computers & Internet
...CD drive door will not open, try a manual eject using straightened paper click through the small hole below the drive tray. If the tray will not open manually and will not then operate normally after ...
CD Tray wont open can you see the light of the cd drive blinking??.........if not then you have a loose connection between your drive and your motherboard. if the light is blinking then you then think
cd tray will not open/dellc521 what do i push to open cd tray It is stucked inside of the drive so try to open and clean the area.
cd tray will not open This might not be the solution you're looking for, but aside from the obvious, "Then get a new CD player," :) if you have something in there that you need to get out, every ...
Question about Dell Dimension Computers & Internet
...cd into tray, than click in and light goes on but that is it. hello, 1.first go to http://support.microsoft.com/mats/cd_dvd_drive_problems click on the green button that has run now Run the microsft ...
132 questions posted
Usually answered in minutes!
2,074 Questions
1,169 Questions
1,075 Questions
718 Questions
514 Questions