Question about Dell Dimension Computers & Internet
...USB ports just to be sure but the motherboard is still probably going to be bad. this problem is computer hardware matter.clean first the motherboard using paint brush.. clean the RAM using eraser. ...
...Usb cord we got the blue error screen and were unable to do anything but turn off the power. Now the computer will not power up. All we get is two amber flashes when we push the power on button. I've ...
Question about Dell Dimension Computers & Internet
Turn On The Pc I Have to unplug and plug back in What you've plug ? if what you mean is a socket monitor to VGA port, i think you have a problem with your monitor. try to use another monitor if U have
...turn moniter on Hp pavilion a705w intel inside celeron Monitor and USB problems are usually down to damaged RAM where the monitor is plugged into the motherboards monitor port. I would recommend ...
...usb ports are working in the front or the back. the monitor port works cause i can see it when it turns on just cant use my mouse or keyboard. akthough when i plug in my usb mouse the light on the ...
...turn my computer on, I don't have power to the USB keyboard or mouse and there is no video on the monitor (monitor has power). All the USB ports have power (I plugged other items in and they have ...
...USB cable that does the same thing. Look closely at the back of the monitor to see if that's your problem. And, make sure the volume is turned up on the computer and the monitor itself. Post back if ...
usb ports was turned off when I went to move the mouse.So I restarted the computer it makes these beeping noises then goes just long beep and never stops,also the screen loads up to the point where it
...USB port I could turn keyboard and mouse to wireless. You will not be able to install windows on that system. The processor speed is about 80Mhz and the ram that came standard is about 32MB. That is ...
Question about Dell Dimension Computers & Internet
turn on Monitor. Screen states NO SIGNAL. Plugged into old computer..works just fine. Make sure you are connecting the monitor signal lead to the correct signal output on the rear of the machine. Some
328 questions posted
Usually answered in minutes!
2,074 Questions
1,169 Questions
1,075 Questions
718 Questions
514 Questions