Philips Philishave HQ5812 Electric Shaver "put battery" Questions

After several months without use I have just put in batteries and it does not work put that battery in some other mobile n check whether its working or not . if rust comes change ur battery

...battery (AA). They are rated for power and I use a 2300 or 2500 mAh version. The higher the number, the greater the power. Put the unit back in the case. Tighten the screw (not too much). Put the ...

...put in new batteries? First, you need to gently pry off the 'cap'on the bottom that surrounds the hole for the cord. Once removed, the side grips will simply pull away revealing 4 screws. Remove ...

...battery before taking it out so you do not put in the wrong direction) 6.Putting them back together. Note #special tool required to take out the circuit board from a mounting?My the battery ...

put it on the charger. Batteries have LCS on them, nothing else. Like the shaver but need help!!!!!!! Panasonic does not make their shaver batteries available to consumers but you will find compatible

...batteries. I followed the instructions in this forum and had Batteries Plus connect in series and put solder tabs on NMH batteries, then installed them myself. It cost

...soldered onto the Control Board (it's unfortunately not just a case of cracking open the case and putting in batteries in an instant) You could obtain batteries from your local Philips Service ...

...put it into charge mode, the green led is on, but the shaver doesn't function. electric shaver hq5812 charges,light is on but does not cut efficiently You need a new set of batteries I have a philips ...

put the battery pack in the shaver, I also wedged a small piece of hard plastic between the bottom of the battery pack (negative post) and the shaver housing.  Anything that fits snugly

so I just bought this and put the batteries in and it doesn't power on. why? You put the batteries in the wrong way.......remove and replace properly!