Dell Precision 380 P4 Dual Core 3 GHz (99382) PC Desktop "bios setup" Questions

...BIOS could not be installed because I can go into the setup and change settings as I like. Please help. Thanks. i think this means that the harddrive needs to be refoarmated as the bios sees no ...

...BIOS instruction: http://support.dell.com/support/edocs/systems/ws370/ Replacing the Battery CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in ...

...setup, dell precision 690 not showing secondary processor using my noggin i would say bios does not support the processor you are trying to use, and you will have to change the bios. link below ...

...bios and cmos which was reloaded. It hangs up after it loads the adaptec ultra/ultra, there used to be a window where I turned the ultra/ultra off. The window no longer comes up and it will not go ...

BIOS Installed Successfully. F2 Setup shows Onboard SATA hard Drive and IDE hard drive both not present. F12 Boot Utility hard drive diagnostics shows Drive 0 as no device and Drive 1 75JNC0 - pass. I

...CPU 1 fan not detected for new replacment fans. Replacement fans are the same as original. Both fans are running. How do I fix message? check your BIOS setup. you can fix the message appearing

...BIOS, can't install XP Home Edition. Tried to install Windows XP Home Edition, the computer had been sold to me by a friend, hangs up on Setup is starting Windows. Sometimes only a certain number of ...

...f10 or another key immediatley after powering up the pc, it usually tells you on screen press enter or f10 or another key to enter bios or setup. let us know how you get on  Thanks for ...

...order to make it work? do i need the SCSI ULTRA U320 hard drive? Ok go to bios setup and then "load bios default" and press "F10" to save and exit. i will tell you in case this not work just tell

...BIOS could not be installed because I can go into the setup and change settings as I like. My hard drives are: 1xSeagate 147gb and 2xHitach 74gb.I did the format and it's still the same problem. Im ...