Dell Dimension PIII Tower Computer XPST500 PC Desktop "pin" Questions

...battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, etc. There will be 3 pins and the jumper will be joining the center pin to either left or right pin. What you need to

...LED, 2-wire power switch, 2-wire reset switch, and a 2-wire speaker lead. The motherboard has a 9-pin front panel connector (J9G1) and a 9-pin control panel connector (J7J2). Separate question:

Dell Dimension 9100 PC Desktop problem I have a Dell Dimension 9100, and the motherboard has 10 pin header for the optional floppy drive. I am trying to install a Dynex Internal All-in-One Card Reader

...and front pannel connectors front panel connectors detail most front panel connectors with a 4 x 5 pin configuration are intel compliant, and are all the same. The "nine" pin is missing, and is the ...

bios pins where is correct placement on DELL 4400 I moved jumper what two pins are right Hello here is the homepage: http://www.dell.com/support/drivers/us/en/04/Product/dimension-4400 To clear the ...

...connectors. Wires from the Front Panel of the computer tower, connect here) There are 2 rows of pins in that connector. Look on the motherboard real close, for a number 1 stamped near that ...

...configuration of the motherboard Hi, This will be found right near the CMOS battery Locate the 3-pin CMOS jumper (RTCRST) on the system board. Remove the jumper plug from pins 2 and 3. Place the ...

...not. Check the specs of your desktop PC here: Ports and Connectors Externally accessible: Serial 9-pin connector; 16550C-compatible Parallel 25-hole connector (bidirectional) Video 15-hole connector ...

...TURN ON. HOOKED UP ANOTHER POWER SUPPLY TO IT, BUT ONLY AN EMBER LIGHT CAME ONE. BUT IT WAS A 20 PIN, AND MY DELL IS A 24 PIN. you'll need to match the power supply, if it's 24-pin, you need to

CONNECTING PCI EXPRESS CARD 4 PIN POWER TO OCTO17 MOTHERBOARD WHERE DO i CONNECT THE 4 PIN POWER LEAD http://www.bing.com/images/search?q=4+Pin+Molex+Splitter&FORM=RESTAB