disk that is drawing too much power (shorting out) from the supply. If you had done something to the system, like move it or open it up for an upgrade, etc.. Look again at all the internal connections
...OPEN THE CASCE.) if your computer is oldish then try this don't for get to set the CD ROM to be the first to load with your windows xp disk in the CD-ROM draw it should say do you want to star form ...
...open is that it thinks there is a disk in the drive. What I would do is boot the pc into command prompt only, (to get the option to do this press the f8 button as the pc starts up) then when you have ...
disk pops back into the convex shape, breaking the contact. When the Power Supply is plugged into power, there is a constant 5 Volt standby power inside the Power Supply. Pressing the Power on switch,
...Open at the top, and bottomB) The top of the 'can' is sealed with a Vent Cover. This is an aluminum thin flat disk. It has a shape etched partway into it. The shape is either an X, or lK.C) ...
...disk. (Seal) The top of the capacitor is partially cut, or etched, with a shape. The shape usually resembles an X, or a lK. When a capacitor starts to fail, a gas develops inside. (Hydrogen Gas) The ...
Question about Gateway Computers & Internet
...open computer case. They're about $6) If you get up in the middle of working on your computer, and leave, upon your return Touch the metal frame again. 2) Remove the ATI graphics card. 3) Plug your ...
...ceased in place and you will have to break the face open if you have a disk in the drive but be careful not to damage the disk as it lays only 35mm in from where the draw face is. I hope this
425 questions posted
Usually answered in minutes!
848 Questions
511 Questions
428 Questions
382 Questions
179 Questions