Question about Dell OptiPlex Computers & Internet
...computer beeps during start-up: Write down the beep code Code Cause 1-1-2 Microprocessor register failure 1-1-3 NVRAM read/write failure 1-1-4 ROM BIOS checksum failure 1-2-1 Programmable interval ...
Question about Dell OptiPlex Computers & Internet
...L Dell Social Media and Communites Diagnostic Beep Codes Code Cause 1-1-2 Microprocessor register failure 1-1-3 NVRAM 1-1-4 ROM BIOS checksum failure 1-2-1 Programmable interval timer 1-2-2 DMA ...
Question about Dell OptiPlex Computers & Internet
...Probable Causes 1-3 Monitor not detected Disconnected or faulty monitor 1-1-3 NVRAM write/read failure Defective system board 1-1-4 BIOS checksum failure Faulty BIOS or defective system board
Question about Dell OptiPlex Computers & Internet
... Any one help thank you! Here are the beep codes for the Thinkpad:" Continuous beeping System board failure One beep; Unreadable, blank or flashing LCD LCD connector problem; LCD backlight inverter ...
Question about Dell OptiPlex Computers & Internet
I have an Optiplex GX 620 Mini Tower that displays a NIC failure error at boot. The error message reads "NIC failure. Press F1 to reboot or F2 to go in to setup." The PC did not boots I have an ...
Question about Dell OptiPlex Computers & Internet
...on, nothing happens. And I really mean - nothing. Can you please tell me possible causes. Possible failures are: Powersupply failure Motherboard failure (Check the capacitors for popped ones) Front
NETWARE AUTHENTICATION FAILURE It took me a hard time in logging in, there are lots of messages popping up like, NETWARE AUTHENTICATION FAILURE, RUDL,LL3 and i cannot easily get in Are you running ...
Question about Dell OptiPlex Computers & Internet
How can I solve DMA page register read/write failure This may be a motherboard failure as the controller chip is onboard. Try unplugging all peripherals,drives, pci cards first and setting the reset ...
...on Dell GX270. I run Dell diagnosis and got the following error message: "Initialization failure: Invalid L1/L2 relationship. L1 size: 0, L2 size:100,000" motherboard failure (This ...
...no_post_diagnostic_information_dell If the power button is solid amber, then there is a motherboard failure or a failure in something connected to the motherboard. Remove any expansion cards and all ...
434 questions posted
Usually answered in minutes!
848 Questions
511 Questions
428 Questions
349 Questions
179 Questions