Dell Dimension E510 Dual Core 2.8 Ghz (847403171179) PC Desktop "hard drive port reset failed" Questions

...Hard Drive data onto someone elses external drive. I reconnected the Hard Drive back into its port and attached the relevant cables making sure they were secure. Rebooted and updated everything back ...

...hard drive and install windows on there and see what happens. Also if you are able to before you try a new hard drive you should do a system restore and restore it back to the day that windows was ...

...hard drive and one CD drive installed then go into the BIOS Setup and turn OFF the Primary Drive 1 and Secondary Drive 1 options under the Drive Configuration menu. To get going with USB ...

...hard drive and the motherboard. (I know that I've frequently had the cables come loose from the motherboard on my ThinkCentre 8433 when I work in the case.) Also check that the power cables are ...

...hard drive, tried other SATA ports on the board, reconnected all cables/wires, etc. The problem started with a fried modem. Do I need a new motherboard? If so, what kind? I have LGA775 w/Intel 915G ...

...hard drive or memory stick (USB drive) and reviewing whether or not the device is detected at POST Check your internal power connection to the board and make sure no pins have worked loose from the ...

...hard drive about 8 months ago, when i replaced the power supply I also reseated the CPU and all has been working very well for the past 4 months till now. Just wondering if someone can help with this ...

computer that you can't live without. (Music, photos and videos). You will need to do a format of the hard drive. As you may have an unknown piece of malware or just a badly corrupted operating system

...hard drive IDE SATA make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty if its a flat 40 pin ide it will be the first to fail Check the ...

frame.the bottom of the PC has 4 screws 2 large ones and 2 smaller ones that hold in the hard drive these all need to be removed.  the screw that holds in the stand also needs to be removed.