Dell Axim X50 Pocket PC "not work" Questions

...work? I am not that familiar with it but have been reading about it at a number of sites. It seems that it works with IPAQ but am curious about the Axim. If it works with the iPAQ it should work on ...

not work. I went to the Wireless PDA Keyboard program installed and I pressed something about a rotation. Since then, the PDA has not been working. I press the power button and it doesn't turn off. In

...not sure that its gonna work. I made my I-Mate PDA-N working finally. I guess the key is to use original charger to charge the battery. I finally noticed I used my Motorola cell charger to charge my ...

...not work and when i put it back on it blinks from green to orange but my new battery says it is at 100% .what do i do. --This is a suggestion. I can not be certain given I have not worked on this ...

...work with the extended battery. HELLO , My dell axim x51v is working by charger without the battery . But with battery is not working and not charging . I have installed a 8GB SD card in my Axim X5, ...

...not work at all now I replaced the digitizer and put my PDA back together, but the new digitizer does not work at all. The PDA comes on just fine but when it tells me to touch the screen to begin, no ...

...work with any of these higher capacity cards? SD cards must be SD not SDHC, there is not an SDHC driver for the X5. You can find regular SD cards up to 4G. CF is no problem, all flash based CF cards ...

...work. When I slide the camera into the compact flash socket the axim locks-up until I pull the camera out of the compact flash slot. I noticed that the photo traveler software installed on the Axim, ...

...not made it respond either. What else can be done other than throwing it away? Hello edil, This sounds like a corrupted ROM file. The ROM stores all your operating system and pda's firmware ...

...NOT work with the X5. Good luck with the wireless card. The Axim does not play well with many of them. (sometimes works but mostly not) Try drivers from d Link and be sure to remove the old drivers ...