Sony VAIO VGC-RB42G PC Desktop "blinking light power supply" Questions

...light is blinking on your motherboard, if both are constant then reseat the memory and CPU and only have the power supply hooked up to the motherboard and not to anything else. If you still can't get ...

...blinking light is in addition to the green blinking light on the back of the PC. This next step is important: You have to disconnect the connector noted above from the motherboard WHILE the power ...

light blinking I moved my computer to a new spot, and when I did I vacuumed off all the dust off the side of it. When I plugged it in it will not power up. The power supply has a green light on it and

...light blinking it won't start... the green light on the power unit just blinks at different speeds.... i unplugged it and the green light wsa still blinking.... dunno what happened. Could be a bad ...

...green light blinking in the back indicates that the power supply went bad and is not turning on, go ahead and get the power supply replaced. Normally that light is supposed to be fully lit and

...power, the supply light blinks.is there a problem with my power supply unit? eah todd is right. Unless your main Plug from the PSU to the Motherboard is disconnected. But the chances opf that are ...

...light that is blinking. No power to the processor. Check to make your power supply is working properly, it should have -12vdc +12vdc -5vdc +5vdc, if the processor is not receiving the 5v the power ...

...power light blink. While the computer is plugged in, unplug the main power supply to the motherboard and re-plug it in. The light next to the plug on the motherboard will come on steady now and it ...

...right up so this time the blinking light indicated a bad power supply. My computer GURU told me it was just a coincidence that the failure happened at the time that I decided to clean up the

blinking light on your motherboard (when the power supply is plugged into the wall). Note: This green blinking light is in addition to the green blinking light on the back of the PC. This next step is