HP Compaq Presario S5100NX (DM172A#ABA) PC Desktop "power button" Questions

...tower 3.the please toggle the power button from inside the tower 4.then put back the front and the side panal connect back the power cable restart the pc using the power button it will start ...

...power Button is working this can be done by opening the cabinet and switching the computer on by touching the two power button front panel pins on the motherboard with a screw driver if the computer ...

...power supply started up. Checked the start button with a multimeter and 0.3 ohms with button pressed and OL with button released. Fixit page says to press CMOS button for 10 sec. Not sure were button ...

...power button in for 15 seconds 4) release the power button 5) plug back in 6) pres the power button and see if it boots up if it does, themn it was either an ittermittent lock up of the mobo or a ...

...power button on the computer does not have any tactile response. Could the power button be defective? Could there be something wrong with the computer's internal power supply? U can check both the ...

...power button for about 30 Seconds to remove all the power from the board. Then plug the power chord back in and hit the power button and see if the computer starts. Let me know if this works for you. ...

power button on the front does nothing. There is a green LED on the back of the power supply just below where the power cord is plugged in. It blinks about 5 times a second with the power cord plugged

...power button in until it shuts off. Then you might want to to turn hibernation off in your power settings in your control panel. If the machine is stuck in sleep mode, the power button should be ...

...power button is depressed or that the part that holds the button has been moved back too much. What I did was remove the power button from the machine, checked the connections to the motherboard and ...

power button won't engage Go to power options, then select advanced then look for "when i press the power button on my computer:" And make sure its selected as "Shut down"