HP Vectra VL800 PC Desktop "insert boot diskette drive" Questions

...INSERT BOOT DISKETTE in A: I went into the BIOS and remove the part where it says boot from floppy and set it to boot from hard drive, but this did not solve the problem. There is also a constant ...

...might be set to boot from the floppy drive. You want to be set to boot from the hard drive), loose diskette/tape drive interface cable, or loose power cable. If possible please rate this

INSERT BOOT DISKETTE IN A: Followed by INVALID BOOT DISKETTE First put the hdd installation cd into the cd drive and try to boot. This should install the hdd driver as well as start formatting the new

boot disks is specific to this version of the operating system Step 1 Insert the Windows 2000 Professional CD into your computer's CD-ROM drive. Insert a formatted, blank diskette into the floppy disk

...insert boot diskette in A. I also set the jumpers on all four setting, one at a time and I'm still getting the same error. I disconnected the A drive and I'm still getting the same error. Thanks ...

...Insert Boot Diskette in A:".I disabled and disconnected floppy drive. When PC is turned on, black screen and I'm asked for current password. Also the cd is running meanwhile. Any help is big help, ...

...BOOT FAILUER, INSERT DISK AND PRESS ENTER'' but I did not install any new hardware neither do I have any cd on any drive. I'm afraid you need to reinstall your windows/linux again. That or check if ...

...BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER I checked the BIOS settings and they are correct. I'm guessing the controller on the motherboard is going bad or has gone bad...any ideas? Computer ...

...Insert Boot Diskette in A:".I disabled and disconnected floppy drive. When PC is turned on, black screen and I'm asked for current password. Also the cd is running meanwhile. Any help is big help, ...

...Boot Failure,Insert system Disk and press enter If it happens that you are prompted by the following error message "DISK BOOT FAILURE INSERT SYSTEM DISK AND PRESS ENTER", "No system disk", it means ...