...button. Nothing happened. It appeared that that was no power. There was power going to computer power supply. Eventually checked power supply with meter and by jumping socket prongs with socket ...
power button on the PC for 5 seconds. This will completely drain any "stuck" power in the components. Now plug the power back into the PC and try booting. If it still does not come back on after this,
button behind this which is located to where the power cord goes into, check if this is turn off, if it is off, turn it on. If still nothing works at all etc fan, lights, cdrom lights.... then i would
...Power button on the front of the computer. 4.Remove the side panel. 5.locate the power cord that connects to the back of the CD or DVD tray that is having the problem. 6.Unplug the power cable and ...
...power button down for 30 secs, reconnecting monitor and power cable only) and trying again. Hope this helps I would check the PSU's power selection switch. In some cases that can be switched to ...
...power button) unplugging it and waiting etc. Nothing seems to work. Any hints? Hello, Anytime you use the sleep mode, your battery is working to save your information. Your battery may be drained, ...
Question about HP Pavilion Computers & Internet
...power button and hold it,then connect the peripherals. 2)open the tower and try to reseat the ram and the memomy slot. 3)try to go to BIOS screen,if it gets stuck while going to bios,shut down the ...
Question about HP Pavilion Computers & Internet
...power back up and press the eject button at the top of the keyboard and hold until disc ejects. If that don't work, then you gonna have to open this thing up and physically take the disc out ...
Question about HP Pavilion Computers & Internet
...power-button for 5 seconds to ensure complete power-drain from the system. Completely remove the video card and blow-off any dust. Inspect the card for blown-capacitors, if none found; re-install the ...
Question about HP Pavilion Computers & Internet
...Power button until you get a message saying "OSD Unlocked". If the problem persists after OSD is unlocked then unplug the monitor from the wall, wait 20 seconds and try again. Fix Two ====== Turn on ...
73 questions posted
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,195 Questions
1,096 Questions
608 Questions