HP Compaq Presario 6310US (DA201A#ABA) PC Desktop "setting" Questions

i forgot administrator password and set up parental controls i want to delete user or restore computer this computer was given to me. I hooked up computer and I went to the main administrator login ...

...Restore 3. Double-click Turn off Configuration and set it to Not configured. Note: If the above setting is already set to Not configured, set it to Enabled and click Apply. Then revert back the ...

...connected to both Motherboard & drive, if its a IDE drive then make sure that the little jumper settings are set correctly. If you have a IDE & its connected to a ribbon cable with another ...

Clock will not adjust properly I've adjusted the clock to the new daylights savings timne but my clock changes bac to where it wants to. Inside the PC is a small lithium cell battery that may be going

...get its wits about it again, so be prepared for a couple of boot cycles. Start conservative default settings before venturing to more adventurous settings. Note if you have a separate video card or ...

...HARD DRIVE. IT TAKES ALMOST 8 MINUTES TO ENTER SET UP PAGE AFTER START AND PRESSING F10? IS THIS A SETTING THAT NEEDS TO BE CHANGED IN SET UP PAGE? Shouldn't take that long. Use the software that ...

...and then the screen goes black and says input signal is out of range please change to recomended settings (1680 by 1050). So far i have checked the wire conecting the moniter to the computer and ...

i forgot administrator password and set up parental controls i want to delete user or restore computer this computer was given to me. I hooked up computer and I went to the main administrator login ...

...router are still in the same place they always have been. Thanks Look for your computer's monitor settings, then adjust its refresh rate. To modify a refresh rate on Windows, right-click anywhere

...so it bter than 800 x 600 which is its max right now?? i understand compter lang i know u canchange setting thrugh bios?? No...don't change settings through the BIOS. Start\Control Panel\Display...to ...