HP Compaq Presario 6310US (DA201A#ABA) PC Desktop "motherboard jumpers" Questions

smsc motherboard jumpers setting(compaq presario 5000 smsc motherboard jumpers setting no need jumpers, the smsc are being setup in the BIOS, enable it or disabled... go to BIOS Setup

...cause there is a defect with it! Make sure the drives cables are securley connected to both Motherboard & drive, if its a IDE drive then make sure that the little jumper settings are set ...

...cable. ANY wire that has Black insulation is a Ground wire. To explain: This is HP Support, and the Motherboard Specifications page, for the Compaq Presario SR1610NX desktop computer, ...

...pc up what can i do. I removed battery, reset jumpers on J1 and 2 Motherboard is gone...i guess so....also check if your power unit is working...i.e...all fans inside are working.... Sorry my ...

...power supply, you can buy a dud sometimes. Could be that there are Electrolytic Capacitors on the motherboard, that have dried up inside, and will show no obvious visual signs of failure. Let's go ...

little glitchy when you reset it. Use the jumpers on the motherboard, if it does not have jumpers remove the cmos battery and reinsert it upside down. Power up the computer. Reverse the previous steps

...to reset bios by jumper but it didn't work...what the issue with the Compaq? It sounds like the motherboard is messed up. if it ever lets you enter windows fully, then do a bios update and driver ...

...computer and I cannot get any video signal at all. (Monitor always says "no signal"). I tried the motherboards monitor plug-"nothing". I installed 2 different working video cards (one PCI and one ...

...jumpers on the back of the drive. If they are both set properly and you still have a problem then check the ribbon cable that runs to the Motherboard to see if it's a "cable select" cable. If so then ...

...test to see if the problem is the Power On switch, or the Power Supply.This is a Top view of the motherboard used in a Compaq Presario SR1617CL Desktop ...