HP Pavilion a1410n (ER890AA) PC Desktop "cases reversed motherboard" Questions

how do i remove the harddrive how do i remove the harddrive Hi, What you will do is turn the case around and loosen the two case screws on the right side of the back case. Then slip off the side panel

hp pavillion a820n will not power up after power surge. Green light flashes when plugged in but no fan, no power at all. Uplugged everything, tried holding power button for 15-30 seconds, etc. But no ...

replace memory cards How do I remove the cd drive so I can install upgraded memory cards to remove your cd drive on a laptop: some laptops have a level that you can pull to remove it although I doubt ...

motherboard do not try to remove it. Your entire mother board will be needed to be replaced if the sound card is the problem. Another option is to buy a separate PCI sound card and then install it. If

replace motherboard want to no how to That's a pretty lengthy answer that would be required.  Basically, open up the machine, unscrew the motherboard from the case, disconnect all the wires ...

motherboard pin config I installed a Systemax Venture motherboard in an different case. I need to know what the front panel pin configuration? Thanks. All motherboards have a print beside the pins, ...

...cases, yes. Sometimes the drive can be removed by pulling it back into the case's motherboard area, then the new drive installed and pushed forward to be flush with the front of the bezel, but not ...

how to replace motherboard 1. Contact eMachines, and purchase an identical replacement motherboard. 2. Disconnect all the exterior cables from your computer (keyboard, power, mouse, et cetera). 3. ...

Instructions on how to replace the motherboard on a Sony Vaio PCV-RS310 Hello halhoffer, the link to the system reference manual can be found here. Just click on system reference manual, this is just ...

...motherboard to see if it is ATX or AT (most cases it will be ATX these days)- buy an ATX PSU and looking at the pin connectors on the motherboard replace the new PSU the same way as the pins are line ...