...8, 1, none. hope this helps. The 105SE was manufactured in either serial or parallel interface configurations. Settings for a serial version are irrelevant for a parallel port unit and vice versa. 1. ...
Question about Zebra Office Equipment & Supplies
...serial settings match between Easylabel and the printer. Easylabel defaults to 9600 baud, 8 data bits, none parity. The Zebra defaults to 9600 baud, 7 data bits, and even parity. This mismatch causes ...
Question about Zebra Office Equipment & Supplies
...^default>LPT1 Serial: Assuming standard communications on the printer of Baud 9600, No parity, 8 bits, 1 stop bit and use of COM 1: At the prompt type: Mode Com1:9600,n,8,1 ECHO ...
Question about Epson TM Office Equipment & Supplies
...serial transmits one bit at a time. Parallel means that all 8 bits in a byte are passed at one time. A parallel port can pass data at about 10K bytes (Standard) to greater than 1M characters per ...
...try here: http://tinyurl.com/cc736c let us know, please rate.
serial to usb adapter(drivers are installed for that as well). Any help would be much appreciated. You need a piece of software to create a Virtual com port, make sure you have the comms set correctly
...serial data cable to the COM1 port of an IBM-compatible computer that is using the PC-DOS? or MS-DOS operating system. NOTE: You can connect the cable to the LPT2 port if the LPT1 port is alreadyin ...
Question about Zebra Office Equipment & Supplies
...8 bit word length, no parity, 1 stop bit, and XON/XOFF. The print queue should be set to match that. Make sure you are using an RS232 serial cable. Not all serial cables are the same. Make sure that ...
...serial port mixed up with the parallel port. I have resolved the problem, it was a DIP switch change which needed to be set. If anybody can not get their computer to communicate with the printer then ...
199 questions posted
Usually answered in minutes!
206 Questions
39 Questions
51 Questions
20 Questions