Epson Stylus CX7800 All-In-One InkJet Printer "paper feed jam" Questions

...paper feed problem Epson CX3800 series printer/scanner will no longer feed paper. Has always been picky (requires at least 24 lb. paper). Now it won't pick up and feed paper at all. I'm assuming this ...

feed paper of any size. No jams ever. Will not feed paper of any size. No jams ever. It just won't feed paper now. It's new. clean the feed rollers with water and soft cloth.. try a stack of paper not

paper feed. I receive the flashing red jam light as soon as feed rollers start to feed paper into printer. All feed operation stops as soon as the feed fault is triggered. Paper never even starts into

...following standard: Paper TypeThicknessWeight Single sheets (plain paper)0.003 to 0.004 inch (0.08 to 0.11 mm) 17 to 24 lb (64 to 90 g/m²) Make sure you are using paper supports and feed

...paper from feed slot, pressed the on button which allowed the `grabber` to release the jammed paper slightly and then was able to [with the aid of long tweezers] remove the jammed paper through the ...

...paper, and press the Form Feed button. 4. Watch the paper as it feeds through and try to determine where the jam is occurring. 5. Check to see if all the rollers are turning. If all the rollers are ...

...the printer. I have seen others with similar problems. I have tried to feed one by one and also a few at a time making sure that the paper is not creased. Thank you for your help. I hope it

...paper wont feed through - seems to get stuck at the beginning of the feed and appears like its in the middle of the paper that is jamming Hello, try this link below. Although the printer is lexmark ...

...paper feed path which is holding up the sensor flag making it think there is paper in it. Or maybe the sensor flag has been broken off by yanking paper out the wrong way when it gets stuck. Get your ...

...paper, and press the Form Feed button. 4. Watch the paper as it feeds through and try to determine where the jam is occurring. 5. Check to see if all the rollers are turning. If all the rollers are ...